top of page

ველო ტური ალგეთის დაცულ ტერიტორიაზე Group

Public·212 members
Rostislav Gorbachev
Rostislav Gorbachev

How to Use Unbrickable Resurrector for Windows 64 to Fix Your Bricked Android Device



How to Use Unbrickable Resurrector for Windows 64 to Fix Your Bricked Android Device




If you have ever tried to flash a custom ROM or root your Android device, you may have encountered the dreaded situation of bricking your device. Bricking means that your device becomes unusable and does not boot up or respond to any commands. This can happen due to various reasons, such as a corrupted firmware, a wrong ROM, a bad USB connection, or a power failure during the flashing process.




unbrickable resurrector for windows 64


Download File: https://www.google.com/url?q=https%3A%2F%2Fbytlly.com%2F2tJOPo&sa=D&sntz=1&usg=AOvVaw0CZH98d8YykhYoiMWYAlua



Fortunately, there is a way to fix your bricked device using a software tool called Unbrickable Resurrector for Windows 64. This tool can help you restore your device to its original state by flashing the stock firmware or a compatible ROM. Unbrickable Resurrector for Windows 64 works with most Samsung devices that use the S3C64XX chipset, such as the Galaxy S, Captivate, Vibrant, and Epic 4G.


In this article, we will show you how to use Unbrickable Resurrector for Windows 64 to unbrick your Android device. Before we begin, make sure you have the following requirements:


  • A Windows 64-bit computer with Odin and drivers installed.



  • A USB cable to connect your device to your computer.



  • A Linux distribution installed on your computer or on a bootable USB drive.



  • The Unbrickable Resurrector for Windows 64 software downloaded from here.



  • The stock firmware or a compatible ROM for your device downloaded from XDA Developers.



Once you have everything ready, follow these steps to unbrick your device:


  • Boot into Linux on your computer or on your USB drive.



  • Extract the Unbrickable Resurrector for Windows 64 software and run it as root.



  • Connect your bricked device to your computer using the USB cable.



  • Select your device model from the list and click on "Start".



  • Wait for the software to detect your device and flash the modified bootloader.



  • Reboot your computer into Windows 64-bit.



  • Run Odin as administrator and select the stock firmware or the compatible ROM file in the PDA section.



  • Make sure that only "Auto Reboot" and "F. Reset Time" are checked in the options section.



  • Put your device into download mode by pressing and holding Volume Down + Home + Power buttons simultaneously.



  • Connect your device to your computer using the USB cable and wait for Odin to recognize it.



  • Click on "Start" and wait for Odin to flash the firmware or the ROM on your device.



  • Your device should reboot automatically and be unbricked.



Congratulations! You have successfully used Unbrickable Resurrector for Windows 64 to fix your bricked Android device. You can now enjoy your device as before or customize it with different ROMs and mods. If you have any questions or problems, feel free to visit XDA Developers for more help and support. e0e6b7cb5c


About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page